|
В Питерском Кее это всего 400 рублей. Но могут быть проблемы:
In order to be compatible with most software, our PCI Products and Drivers
will attempt
to "Re-Map" the I/O Addresses used back to Legacy (ISA type) values.
We are able to do this in:
DOS, Windows-95, Windows-98 and Windows-me.
Unfortunately, we are NOT able to Re-Map in:
Windows-NT, Windows-2000 and Windows-xp.
These versions of Windows maintain a much tighter control over the I/O
devices,
and prevent our Re-Mapping them at the Driver level.
When the Re-Mapping is not permitted, the device must use the Addresses
assigned by the PCI System at Boot-Up.
The Re-Mapping only affects the I/O Addresses.
The IRQ used by the device is assigned by the PCI System, and can NOT be
changed.
If the software application (or Driver) expects the Port to use Legacy
resources,
it will not be possible to make it work with a PCI based Port when using
Win-NT, Win-2000 or Win-xp.
Eric D. Larson
Customer Support Engineer
MosChip USA
3335 Kifer Road
Santa Clara, CA 95051
E-Mail : Support@moschip.com
Phone : (408) 737-7141
FAX : (408) 737-7708
E-mail: info@telesys.ru