|
1) Эта ссылка через myTi, т.е. некоторым придется регистрироваться.
2) По умолчанию она ни то, ни се. Но грузится с USB (что и делает драйвер). Вот выдержка из манула от кита переходника.
At initial reset, bootcode in internal ROM tries to load firmware and/or descriptor
information from an external serial EEPROM. If the EEPROM is not present,
the bootcode directs the 3410 to connect to the USB host for download
of the application firmware. Once the download is complete, the 3410 reconnects
to the host to be configured with the new application.
E-mail: info@telesys.ru