Отправлено Bobson 16 июля 2004 г. 18:44 В ответ на: Ответ: Прийдется на первый раз у кого-нибуть одолжить :) отправлено NB 16 июля 2004 г. 16:11

DESCRIPTION
FlashBlaster is a low-cost solution for
programming of flash memory on Silicon
Laboratories devices.
The supported families are:
· C8051F000/001/002
· C8051F005/006/007
· C8051F010/011/012
· C8051F015/016/017
· C8051F018/019
· C8051F020/021/022/023
· C8051F040/041/042/043
· C8051F060/061/062/063
· C8051F120/121/122/123
· C8051F124/125/126/127
· C8051F206/220/221/226/
· C8051F230/231/236
FlashBlaster plugs into standard parallel LPT
port.
Comes with easy to use software that runs on
Win98, Win2k and WinXP platforms. No
special drivers are required.
FEATURES
· Programs all Silicon Laboratories devices
with JTAG debug port
· Automatically detects chip family
· Pin-compatible with Silicon Laboratories
serial port JTAG adapter
· Programs both code Flash and scratch-pad
flash areas
· Programs security fuses
· Allows read-back of both program code and
scratch-pad Flash areas
· Built-in HEX editor for last-minute changes of
programming data
· Supports standard LPT ports as well as PCI
add-on parallel port adapters.User-defined
LPT port base address is supported
· Command line interface enables batch
programming
· Fast – erases, programs and verifies 64K
device in 60 seconds on P4/1.6MHz PC
· Software supports DILOGIC serial port boot
loader for in-application code updates

• http://www.dilogic.hr/downloads.html

• Кстати на просторах инета есть схемы и ПО для программирования новых серий Cygnal по интерфейсу С2, но конечно EC2 рулит он универсальный — Bobson   (16.07.2004 18:49, пустое)