|
Errata (All Date Codes)
• Releasing Reset Condition without Clock
• Incorrect Channel Changes in Free Running Mode
• 32 kHz Oscillator may Fail at Higher Voltages
• Error in Half Carry Flag
• Error in Writing Reset Status Bits
• Wake-up from Sleep Executes Instructions before the Interrupt is Serviced
• The SPI Can Send Wrong Byte
• Serial Programming at Voltages below 3.0V
• Wake-up from Power-save without Global Interrupt Enabled
• UART Loses Synchronization if RXD Line is Low when UART Receive is Disabled
E-mail: info@telesys.ru