сдул всё по ресету, таже пестня..

Отправлено Aleksey75 21 апреля 2009, г. 11:16
В ответ на: Some precautions regarding the RESET line must be taken to ensure proper communication over the debugWIRE interface. If there is a pull-up on the RESET line, this resistor must be larger than 10Kohm, and there should be no capacitive load. The pull-up resistor is not required for debugWIRE functionality. Other logic connected to the RESET line should be removed. отправлено пользователем PeterD 21 апреля 2009, г. 10:52

---