FTDI сделала подарочек. Выложила новые дрова. Я с дуру скачал вроде даже не бетта версию и установил. В результате выяснилось что библиотека не желает компилиться под Borland C 5!
Ну думаю, фигня сейчас снесу. Фигушки. Раньше у них была программка которая это делала моментом, а теперь сообщение которое привожу ниже. Кто нибудь, может объясните мне дураку каким образом их удалить, каким небудь регедитом и или как? Нефига не пойму из этой ахинеи как мне от этого дерьма теперь избавиться!!!

FTDI no longer supply an uninstaller program as part of the driver package. Consequently, a new method
for uninstalling has to be used. Devices can be removed using the Device Manager by simply right-clicking
on the device and selecting "Uninstall". This will delete the associated registry entries for that device only.
Under Windows XP, driver files and OEM INF and PNF files must be removed manually or by using a
custom application. OEM INF and PNF files are located in the Windows\Inf directory and can be identified by
searching for a VID and PID string matching the device installed e.g. VID_0403&PID_6001. Once the
matching OEM INF files are found (e.g. oem10.inf for FTDIBUS.INF and oem11.inf for FTDIPORT.INF), the
corresponding PNF files must also be removed (e.g. oem10.pnf and oem11.pnf). Driver files are located in
the Windows\System32 and Windows\System32\Drivers directories.
Some points to note about this un-installation method:
• In the case of FT2232 devices, a composite device is also installed. This can also be removed by
right-clicking on the composite device in the Device Manager and selecting "Uninstall".
• If the VCP driver has been installed, the COM port driver should be removed before the bus driver.
If the bus is removed first, the COM port will no longer appear in the Device Manager.
• If the driver files are deleted while other installed devices still require them those devices will not
work correctly. This can be fixed by right clicking the device and selecting "Reinstall Driver" which
will replace the missing files.
• If a device to be uninstalled is not connected to the PC, the device can still be removed by setting
the device manager to show phantom devices. This can also allow a virtual COM port to be
uninstalled if the bus layer has been removed first. Instructions on how to display phantom devices
are given in the Advanced Driver Options application note.