Требуется программист в Зеленограде
- обработка данных с датчиков; ColdFire; 40 тыс. e-mail:jobsmp@pochta.ru |
USB driver installation instructions for Atmel JTAGICE mkII
--------------------------------------------------------------------
The USB driver for Atmel JTAGICE mkII is NOT automatically installed
during the product installation. You must manually run a batch
file to install the driver.
Depending on your operating system, you should follow one of the
following installation procedures:
--------------------------------------------------------------------
Windows 2000 and Windows XP
--------------------------------------------------------------------1. Attach the Atmel JTAGICE mkII emulator to your computer, using the
USB cable .
2. Power up the Atmel JTAGICE mkII emulator.3. Run the batch file wdreg.bat by double-clicking on it. wdreg.bat
is located in the directory avr\drivers\jtagIceMkII in the product
installation directory.
--------------------------------------------------------------------
Windows 98 and Windows ME
--------------------------------------------------------------------1. Attach the Atmel JTAGICE mkII emulator to your computer, using the
USB cable .
2. Power up the Atmel JTAGICE mkII emulator.3. Run the batch file wdreg16.bat by double-clicking on it. wdreg16.bat
is located in the directory avr\drivers\jtagIceMkII in the product
installation directory.
Copyright IAR Systems 2005. All rights reserved.
в EWAVR_UserGuide.pdf всё расписано ,в хелпе наконец