[an error occurred while processing this directive]
|
1. Create a data account using the at+cgdcont command i.e.
at+cgdcont=1,”IP”,”internet”. This hold the necessary information
required to make a GPRS ‘call’.
2. Make a GPRS call using the standard dial command but using the dial
string *99***1#
3. Once the unit has connected through to the APN correctly it will return
a CONNECT message and enters V.250 online data mode.
4. At this point the application needs to initiate a PPP/TCP/IP
conversation.
Составить ответ ||| Конференция ||| Архив
Ответы
E-mail: info@telesys.ru