[an error occurred while processing this directive]
|
avreal/WIN32 - AVR controllers LPT programmer by Redchuk Alexandr
v1.25rev4 (Mar 24 2006 08:54:51) http://www.ln.com.ua/~real/avreal
bug-reports, suggestions and so on mail to avreal@real.kiev.ua
Command:
-p1 -aa -% +tiny2313 -v -f
% LPT base port 0x378
% assume that LPT data writes not faster then 1uS
% Atmel adapter for STK not found
% ByteBlasterMV found
% ByteBlaster mode
% osc = 800kHz -> setup=3, hold=3,2
% Reset
% PgmOn reply 0x00005300
% Synchronised after 1 try
% GetID reply 0x0030001E
% GetID reply 0x00300091
% GetID reply 0x0030000A
% Read ID: 0x1E910A
Device connected, TINY2313 detected
% ReadLock command 0x58000000
% ReadLock reply 0x005800FF
Chip not locked
% ReadOsccal command 0x38000000
% ReadOsccal reply 0x00380060
% ReadOsccal command 0x38000100
% ReadOsccal reply 0x0038005E
% ReadFuses command 0x50000000
% ReadFuses reply 0x005000A4
% ReadFuses command 0x58080000
% ReadFuses reply 0x005808CF
% ReadFuses command 0x50080000
% ReadFuses reply 0x005008FF
Fuses
OSCCAL = 60, 5E
CKDIV = 1
CKOUT = 0
SUT = 2
CKSEL = 4
DWEN = 1
EESAVE = 1
WDTON = 0
BODLEVEL = 7
RSTDISBL = 1
SELFPRGEN = 1
Verifying fuses
% ReadFuses command 0x50000000
% ReadFuses reply 0x005000A4
% ReadFuses command 0x58080000
% ReadFuses reply 0x005808CF
% ReadFuses command 0x50080000
% ReadFuses reply 0x005008FF
passed
Reset pin released
Adapter disabled
E-mail: info@telesys.ru