|
|
Note: All Port 3 pins excluding those that can be used as A/D inputs (P3.28 and P3.29)
are functionally 5V tolerant. Port 3 pin configured to perform an input function will use builtin
pull-up resistor to set the default input level to high. If the A/D converter is not used at all,
pins associated with A/D inputs can be used as 5V tolerant digital IO pins. See "A/D
Converter" chapter for A/D input pin voltage considerations.
вот они и 0.8 делают
|
|
E-mail: 
info@telesys.ru
