[an error occurred while processing this directive]
|
Relocation Type Description
AT address Specifies an absolute segment. The segment will be placed at the
specified address.
BITADDRESSABLE Specifies a segment which will be located within the bit addressable
memory area (20H to 2FH in DATA space). BITADDRESSABLE is only
allowed for segments with the class DATA that do not exceed 16 bytes in
length.
INBLOCK Specifies a segment which must be contained in a 2048Byte block. This
relocation type is only valid for segments with the class CODE.
INPAGE Specifies a segment which must be contained in a 256Byte page.
OFFS offset Specifies an absolute segment. The segment is placed at the starting
address of the memory class plus the specified offset. The advantage
compared to the AT relocation type is that the start address can be
modified with the Lx51 linker/locater control CLASSES. Refer to the
“CLASSES” on page 336 for more information.
OVERLAYABLE Specifies that the segment can share memory with other segments.
Segments declared with this relocation type can be overlaid with other
segments which are also declared with the OVERLAYABLE relocation
type. When using this relocation type, the segment name must be
declared according to the C251, CX51, C51 or PL/M-51 segment naming
E-mail: info@telesys.ru