[an error occurred while processing this directive]
|
перепробовал кучу GEL-ей ошибка стабильная:
Can't Initialize Target CPU:
Error 0x80000240/-1031
Fatal Error during: Initialization, OCS,
Device driver: Problem with the Emulation Controller.
It is recommended to RESET EMULATOR. This will disconnect each
target from the emulator. The targets should then be power cycled
or hard reset followed by an emureset and reconnect to each target.
I/O Port = 240
Board Name: OSK5912 PP Emulator
Cpu Name: ARM92x
Abort: Close Code Composer Studio.
Retry: Try to initialize the target again.
Ignore: Ignore the initialization error and start
without target debugging access.
Diagnostic: Run diagnostic utility.
E-mail: info@telesys.ru